IMPORTANT ADVICE:

We moved our shop to a better location...
Klick to reach our NEW WEBSITE.

Please note:

If you are a returning customer your account is moved as well, and you do not need to register again in the new website.
Your history and your past orders will remain here, available for the next 2 years.

This website remains active but the orders can't no longer be placed.

Pumps and Accessories

Pumps and Accessories
Show:
Sort By:

WHALE Tiptoe MK4 foot pump (Code 15.130.90)

Foldable pump, the pumping button is released by rotating the foot...

59.76€ Ex Tax: 49.80€

Sink double-acting foot pump (Code 15.253.00)

Swivelling inlet/outlets, neoprene diaphragm, nylon body...

56.29€ Ex Tax: 46.91€

Double acting hand pump, designed to suction oil (Code 15.259.01)

Fitted with nylon hose for fitting onto oil sidepiece and drainage pipe; also suitable for draining needy bilges...

20.18€ Ex Tax: 16.82€

Small double-acting pump. Length 230 mm (Code 15.260.00)

Suitable for extracting oil from the motor sump, or petrol, water, etc...

17.22€ Ex Tax: 14.35€

Small double-acting pump. Length 430 mm (Code 15.261.00)

Suitable for extracting oil from the motor sump, or petrol, water, etc...

41.38€ Ex Tax: 34.48€

Hand pump foldable behind the bulkhead (Code 15.262.25)

Fitted with locking trap door and joints for adjustable pipes on the back...

57.17€ Ex Tax: 47.64€

Grey replacement door for 15.262.25 (Code 15.262.27)

Fitted with locking trap door and joints for adjustable pipes on the back...

3.59€ Ex Tax: 2.99€

Hand bilge pumps WHALE - GUSHER URCHIN (Code 15.262.34)

Obligatory on all boats in category A and B, in accordance with current EC standards. High quality product, made with the best materials on the market..

95.82€ Ex Tax: 79.85€

Hand bilge pumps WHALE - CHIMP MK 3 (Code 15.262.35)

Obligatory on all boats in category A and B, in accordance with current EC standards. High quality product, made with the best materials on the market..

76.52€ Ex Tax: 63.77€

Hand bilge pumps WHALE - MKIII GUSHERURCHIN (Code 15.262.36)

Obligatory on all boats in category A and B, in accordance with current EC standards. High quality product, made with the best materials on the market..

109.06€ Ex Tax: 90.88€

Manual double-acting bilge pump (Code 15.263.00)

Fitted with central SOFT sleeve for better intake. Drain hose cm 100...

14.47€ Ex Tax: 12.06€

Bilge pumps for suction/pressing, models PONABOCUS. Length 1000 mm (Code 15.263.10)

Provide easy control of the suctioned liquid, supplied with terminal extension and special discharge spiral hose...

19.45€ Ex Tax: 16.21€

Bilge pumps for suction/pressing, models PONABOCUS. Length 350 mm (Code 15.263.35)

Provide easy control of the suctioned liquid, supplied with terminal extension and special discharge spiral hose...

16.49€ Ex Tax: 13.74€

Bilge pumps for suction/pressing, models PONABOCUS. Length 550 mm (Code 15.263.55)

Provide easy control of the suctioned liquid, supplied with terminal extension and special discharge spiral hose...

18.78€ Ex Tax: 15.65€

WHALE-HENDERSON plastic bilge pumps. Length 35 cm (Code 15.264.35)

Made with the best materials available on the market; high quality pumps, fitted with drain spiral pipe and terminal outlet; suitable for pouring gaso..

38.72€ Ex Tax: 32.27€

WHALE-HENDERSON plastic bilge pumps. Length 55 cm (Code 15.264.55)

Made with the best materials available on the market; high quality pumps, fitted with drain spiral pipe and terminal outlet; suitable for pouring gaso..

43.03€ Ex Tax: 35.86€

Ponabocus bilge pump 390 mm (Code 15.265.01)

Equipped with 95-cm drain tube. Ergonomic grip handle...

8.72€ Ex Tax: 7.27€

Ponabocus bilge pump 550 mm (Code 15.265.02)

Equipped with 95-cm drain tube. Ergonomic grip handle...

10.73€ Ex Tax: 8.94€

Ponabocus bilge pump 1000 mm (Code 15.265.03)

Equipped with 95-cm drain tube. Ergonomic grip handle...

13.64€ Ex Tax: 11.37€

PIPER PUMP vacuum self-emptying (Code 15.266.00)

Made of anodized light alloy; fitted with hose and stainless steel clamp for mounting the hose to the pump; universal size for all outboard engines...

18.73€ Ex Tax: 15.61€

DRAINMAN bilge pump (Code 15.267.00)

This pump exploits the movement of the boat generated by wind and waves, when at anchor or in a marina. It is made of stainless steel materials and it..

66.29€ Ex Tax: 55.24€

Models WHALE ''MKV''. Mounting - Floor, wall or behind the bulkhead (Code 15.268.01)

Fitted with stainless steel removable handle, neoprene diaphragm, immediate inspection from the inside through the snap-on cover; can suction any type..

110.66€ Ex Tax: 92.22€

Models WHALE ''MKV''. Mounting - Specific for mounting behind the bulkhead (with watertight trap door) (Code 15.268.03)

Fitted with stainless steel removable handle, neoprene diaphragm, immediate inspection from the inside through the snap-on cover; can suction any type..

148.88€ Ex Tax: 124.07€

Spare cover for 1526801 (Code 15.268.05)

Fitted with stainless steel removable handle, neoprene diaphragm, immediate inspection from the inside through the snap-on cover - can suction any ty..

42.42€ Ex Tax: 35.35€

Maxi pump WHALE ''Henderson'' (Code 15.270.00)

Made up of two combined MKV pumps; removable handle; concealed installation behind the bulkhead, fitted with trapdoor (to be ordered separately). The ..

470.14€ Ex Tax: 391.78€

WHALE ''Henderson Compact 50'' pump (Code 15.350.00)

Designed for concealed installation, ideal for mounting in confined spaces, fitted with swivelling inlet and outlet jointly with a lower casing. Also ..

103.44€ Ex Tax: 86.20€

Manual pump WHALE Smart Bail'' (Code 15.360.25)

Fitted with built-in handle; easy to install with just two fastening screws; equipped with built-in gasket thus it does not require the use of silicon..

58.08€ Ex Tax: 48.40€

Manual pump WHALE Smart Bail'' (Code 15.360.38)

Fitted with built-in handle; easy to install with just two fastening screws; equipped with built-in gasket thus it does not require the use of silicon..

58.08€ Ex Tax: 48.40€

Hand pump WHALE ''MK6'' (Code 15.650.00)

Ideal as emergency pump, swivelling, adjustable by height, made of nylon, light alloy and stainless steel...

67.13€ Ex Tax: 55.94€

Bailer (Code 15.801.05)

Made of orange polyethylene. Resistant to high and low temperature...

2.71€ Ex Tax: 2.26€

Self-priming motor pump fitted with OLEOMAC internal-combustion engine (Code 16.013.00)

Fitted with 2-stroke 30 c.c. motor; high performance; plastic body, no maintenance required, salt water resistant. This motor pump is specially suitab..

390.26€ Ex Tax: 325.22€

Immersion pump Rule-Mate'', fully automatic - Capacity l/min 71 - 12 V (Code 16.020.10)

Eco-friendly antistatic pumps with electronic sensor. When the water level reaches 7 cm the pump activates and stops when the water is totally drained..

147.78€ Ex Tax: 123.15€

Immersion pump Rule-Mate'', fully automatic - Capacity l/min 71 - 24 V (Code 16.020.11)

Eco-friendly antistatic pumps with electronic sensor. When the water level reaches 7 cm the pump activates and stops when the water is totally drained..

156.31€ Ex Tax: 130.26€

Immersion pump Rule-Mate'', fully automatic - Capacity l/min 97 - 12 V (Code 16.020.15)

Eco-friendly antistatic pumps with electronic sensor. When the water level reaches 7 cm the pump activates and stops when the water is totally drained..

287.21€ Ex Tax: 239.34€

Immersion pump Rule-Mate'', fully automatic - Capacity l/min 129 - 12 V (Code 16.020.20)

Eco-friendly antistatic pumps with electronic sensor. When the water level reaches 7 cm the pump activates and stops when the water is totally drained..

350.83€ Ex Tax: 292.36€

Immersion pump Rule-Mate'', fully automatic - Capacity l/min 129 - 24 V (Code 16.020.21)

Eco-friendly antistatic pumps with electronic sensor. When the water level reaches 7 cm the pump activates and stops when the water is totally drained..

363.96€ Ex Tax: 303.30€