IMPORTANT ADVICE:

We moved our shop to a better location...
Klick to reach our NEW WEBSITE.

Please note:

If you are a returning customer your account is moved as well, and you do not need to register again in the new website.
Your history and your past orders will remain here, available for the next 2 years.

This website remains active but the orders can't no longer be placed.

Chains, joints and anchoring accessories

Chains, joints and anchoring accessories
Show:
Sort By:

Shackles with embedded pin, for anchors 5 Mm (Code 01.080.05)

Made of AISI 316 stainless steel; enables the anchor to fit into stemheads without getting tangled...

1.67€ Ex Tax: 1.39€

Shackles with embedded pin, for anchors 6 Mm (Code 01.080.06)

Made of AISI 316 stainless steel; enables the anchor to fit into stemheads without getting tangled...

1.68€ Ex Tax: 1.40€

Shackles with embedded pin, for anchors 8 Mm (Code 01.080.08)

Made of AISI 316 stainless steel; enables the anchor to fit into stemheads without getting tangled...

2.78€ Ex Tax: 2.32€

Shackles with embedded pin, for anchors 10 Mm (Code 01.080.10)

Made of AISI 316 stainless steel; enables the anchor to fit into stemheads without getting tangled...

4.45€ Ex Tax: 3.71€

Shackles with embedded pin, for anchors 12 Mm (Code 01.080.12)

Made of AISI 316 stainless steel; enables the anchor to fit into stemheads without getting tangled...

7.64€ Ex Tax: 6.37€

Shackles with embedded pin, for anchors 14 Mm (Code 01.080.14)

Made of AISI 316 stainless steel; enables the anchor to fit into stemheads without getting tangled...

13.18€ Ex Tax: 10.98€

Shackles with embedded pin, for anchors 16 Mm (Code 01.080.16)

Made of AISI 316 stainless steel; enables the anchor to fit into stemheads without getting tangled...

17.39€ Ex Tax: 14.49€

Shackles with embedded pin, bow version 6 Mm (Code 01.081.06)

Made of AISI 316 stainless steel, they allow trouble free anchor stowing...

1.82€ Ex Tax: 1.52€

Shackles with embedded pin, bow version 8 Mm (Code 01.081.08)

Made of AISI 316 stainless steel, they allow trouble free anchor stowing...

3.11€ Ex Tax: 2.59€

Shackles with embedded pin, bow version 10 Mm (Code 01.081.10)

Made of AISI 316 stainless steel, they allow trouble free anchor stowing...

5.10€ Ex Tax: 4.25€

Shackles with embedded pin, bow version 12 Mm (Code 01.081.12)

Made of AISI 316 stainless steel, they allow trouble free anchor stowing...

8.46€ Ex Tax: 7.05€

Shackles with embedded pin, bow version 14 Mm (Code 01.081.14)

Made of AISI 316 stainless steel, they allow trouble free anchor stowing...

13.26€ Ex Tax: 11.05€

PAOMAR anchor retriever (Code 01.101.00)

Made of reinforced polymer with fiberglass, adaptable to any type of anchor up to 8 kg, fits any boat up to a maximum length of 8 metres. Can fit into..

23.98€ Ex Tax: 19.98€

Anchor retrievers (Code 01.102.00)

Made of solid brass. Is used to retrieve anchors that are tangled in lines, sag of chains, chains or others...

45.89€ Ex Tax: 38.24€

Anchor line with chain (Code 01.105.00)

Made of orange levilene, standardized for anchors, includes a 2 metre galvanized chain and a shackle for anchor fitting...

22.08€ Ex Tax: 18.40€

CHAIN STOPPER safety device - version made of pressed sheet + microcasting. Delux version 6/8 mm (Code 01.119.34)

It blocks the anchor chain. During navigation, it avoids the chain fortuituos down drift and while at anchorage it avoids the winch from being overstr..

31.57€ Ex Tax: 26.31€

CHAIN STOPPER safety device - version made of pressed sheet + microcasting. Delux version 10/12 mm (Code 01.119.35)

It blocks the anchor chain. During navigation, it avoids the chain fortuituos down drift and while at anchorage it avoids the winch from being overstr..

41.93€ Ex Tax: 34.94€

Signalling buoy (Code 01.210.00)

This buoy contains a 20-metre polyesther ribbon rolled up on a self-winding roll. The ribbon is to be fastened to the anchor crown by means of a shack..

298.01€ Ex Tax: 248.34€

Joint without overhanging parts, for anchors 6-8mm (Code 01.220.01)

Anchor connector made of 316 stainless steel, no over-hanging parts used to connect the chain to the anchor. It lets the anchor chain slide smoothly t..

16.08€ Ex Tax: 13.40€

Joint without overhanging parts, for anchors 9-10mm (Code 01.220.02)

Anchor connector made of 316 stainless steel, no over-hanging parts used to connect the chain to the anchor. It lets the anchor chain slide smoothly t..

32.15€ Ex Tax: 26.79€

Chain line adapter 10/6 mm (Code 01.230.01)

Designed to connect the archor chain into the respective line, without knots, it is also suitable for stern mooring. Made of mirror polished AISI 316 ..

25.15€ Ex Tax: 20.96€

Chain line adapter 12/8 mm (Code 01.230.02)

Designed to connect the archor chain into the respective line, without knots, it is also suitable for stern mooring. Made of mirror polished AISI 316 ..

28.85€ Ex Tax: 24.04€

Chain line adapter 16/10 mm (Code 01.230.03)

Designed to connect the archor chain into the respective line, without knots, it is also suitable for stern mooring. Made of mirror polished AISI 316 ..

33.65€ Ex Tax: 28.04€

Chain line adapter 20/12 mm (Code 01.230.04)

Designed to connect the archor chain into the respective line, without knots, it is also suitable for stern mooring. Made of mirror polished AISI 316 ..

37.61€ Ex Tax: 31.34€

Kalibrierte Vorlaufkette, feuerverzinkt - extrem widerstandsfähig AQUA 7 mm8x 50m (Art.01.371.08-050)

Under the same mechanical resistance conditions, this chains enables the use of a lower section:a) 8 mm AQUA 7 instead of 10 mm standardb) 10 mm AQUA..

12.56€ Ex Tax: 10.47€

Kalibrierte Vorlaufkette, feuerverzinkt - extrem widerstandsfähig AQUA 7 mm8x 100m (Art.01.371.08-100)

Under the same mechanical resistance conditions, this chains enables the use of a lower section:a) 8 mm AQUA 7 instead of 10 mm standardb) 10 mm AQUA..

12.22€ Ex Tax: 10.18€

Kalibrierte Vorlaufkette, feuerverzinkt - extrem widerstandsfähig AQUA 7 mm10x 50m (Art.01.371.10-050)

Under the same mechanical resistance conditions, this chains enables the use of a lower section:a) 8 mm AQUA 7 instead of 10 mm standardb) 10 mm AQUA..

20.52€ Ex Tax: 17.10€

Kalibrierte Vorlaufkette, feuerverzinkt - extrem widerstandsfähig AQUA 7 mm10x 100m (Art.01.371.10-100)

Under the same mechanical resistance conditions, this chains enables the use of a lower section:a) 8 mm AQUA 7 instead of 10 mm standardb) 10 mm AQUA..

20.52€ Ex Tax: 17.10€